Upcoming Events

Menorah Lighting

28 Dec, 2024 PM 6:45 — 28 Dec, 2024 PM 7:30   
Event details

Menorah Lighting at Crawford Square on Main Street.

  • Time
    28 Dec, 2024 PM 6:45 — 28 Dec, 2024 PM 7:30
${DataItem.Address.Title}
${DataItem.Address.MarkerText}

Town Hall Closed: Christmas

25 Dec, 2024 — 30 Dec, 2023   
Event details

Town Hall Closed: Christmas

  • Time
    25 Dec, 2024 — 30 Dec, 2023
${DataItem.Address.Title}
${DataItem.Address.MarkerText}

Town Board Meeting

19 Dec, 2024 PM 7:00 — 19 Dec, 2024 PM 8:00   
Event summary
Town Board Meeting
  • Time
    19 Dec, 2024 PM 7:00 — 19 Dec, 2024 PM 8:00
${DataItem.Address.Title}
${DataItem.Address.MarkerText}

Planning Board Meeting

11 Dec, 2024 PM 7:00 — 11 Dec, 2024 PM 8:00   
Event summary
Planning Board Meeting
  • Time
    11 Dec, 2024 PM 7:00 — 11 Dec, 2024 PM 8:00
${DataItem.Address.Title}
${DataItem.Address.MarkerText}

Zoning Board - Public Hearing - 22-1-72.1 - 269 Stone Schoolhouse Road

04 Dec, 2024 PM 7:30 — 04 Dec, 2024 PM 7:40   
Event summary
Zoning Board - Public Hearing - 22-1-72.1 - 269 Stone Schoolhouse Road
Event details

TOWN OF CRAWFORD
ZONING BOARD OF APPEALS
PUBLIC HEARING NOTICE
121 Route 302
Pine Bush, NY
NOTICE IS HEREBY GIVEN, that the Zoning Board of Appeals of the Town of Crawford will hold a public hearing on the application for area variances for front yard setbacks for existing structures on Lot #6 located at the property at 269 Stone Schoolhouse Rd., designated as 22-1-72.1 on the Tax Map of the Town of Crawford in the “I” Zoning District, owned by 269 Shawanga Valley LLC. Said hearing will take place on December 4, 2024, at 7:30 P.M. at 121 Route 302, Pine Bush, NY.
For the Zoning Board of Appeals
Bruce Schwope, Chairman

  • Time
    04 Dec, 2024 PM 7:30 — 04 Dec, 2024 PM 7:40
${DataItem.Address.Title}
${DataItem.Address.MarkerText}

Zoning Board of Appeals Meeting

04 Dec, 2024 PM 7:30 — 04 Dec, 2024 PM 8:30   
Event summary
Zoning Board of Appeals Meeting
  • Time
    04 Dec, 2024 PM 7:30 — 04 Dec, 2024 PM 8:30
${DataItem.Address.Title}
${DataItem.Address.MarkerText}

12-04-2024 OC DMV Mobile

04 Dec, 2024 AM 10:00 — 04 Dec, 2024 PM 3:30   
  • Time
    04 Dec, 2024 AM 10:00 — 04 Dec, 2024 PM 3:30
${DataItem.Address.Title}
${DataItem.Address.MarkerText}

Crawford Press Releases

rss

Please find and view the most up to date news and information regarding the Town of Crawford listed below.

Water Main Flushing Program

The 2024 Water Main Flushing Program began on November 11,2024

November 11, Main well to Main Street, includes Holland to EJR, Kelly, Borden and Cameron

November 12, Main well to Black hawk Road, Boniface, to Route 52(McDonalds) includes Ted, and Hannaford.

November 13, Route 302 to Route 52i includes High School, Crispell, Edmunds and Main Street

November 14, Maple Ave., New St., Center, Charles, Prospect, Railroad.

November 15, Depot, Hueg Place

November 18, North St., Orchard, Van Kuren, Shawangunk, Finneran, James, Kericle

November 19, Greising, Marten, Arthur, Gross, Hardenburgh    

Please contact Water Department at 744-2515 with any questions or comments about 2019 flushing program.

More Information About Flushing

During the flushing season, most crews work between 9:00 a.m. and 1:00 p.m. Monday through Friday,

What is the Water Main (Hydrant) Flushing Program?

To improve water quality and minimize discoloration, water mains are comprehensively flushed by a technique known as Conventional flushing. The procedure is performed in warm-weather months and involves the systematic opening and closing of hydrants, one section of main at a time, to force the water through the pipes at high velocity, removing accumulated mineral sediment until the water is clear. The operation can take from a few minutes to over an hour, although most last about 30 minutes.

How Will Flushing Affect Water Service?

When flushing crews are working close to your residence or business, you may experience periods of very low pressure or even a complete stoppage of service. Flushing operations may also lead to discolored water, which can be drawn into homes and businesses if the water is being used during or immediately following the flushing. Such events should affect customers for a few hours at most. The discoloration is caused by iron (red color) or manganese (black color) particles being dislodged from the water main which can stain porcelain and laundry. If discoloration occurs, open the cold tap nearest the water meter—usually a basement sink—to full flow until the water runs clear. In some situations, this may take 5 to 10 minutes. It is also advised that you make sure your water is clear before doing laundry or other projects for which discolored water could cause problems.

A precise schedule of flushing operations is difficult to determine more than a day or two in advance. If you wish to be notified before work will be done in your area, please call Water Department at 744-2515

We ask for your patience and understanding during this critical main cleaning process.

 

Annual Drinking Water Quality for 2023 - Pine Bush Water District

121 State Route 302, Pine Bush, N.Y. 12566

Public Water Supply ID# 3503553

To comply with State and Federal regulations, the Pine Bush Water District will be annually issuing a report describing the quality of your drinking water.  The purpose of this report is to raise your understanding of drinking water and awareness of the need to protect our drinking water sources. This report provides an overview of last year’s water quality.  Included are details about where your water comes from, what it contains, and how it compares to State standards.

If you have any questions about this report or concerning your drinking water, please contact Chris Finnegan, Superintendent of Water and Sewer, at 744-2515.  We want you to be informed about your drinking water.  If you want to learn more, please attend any of our regularly scheduled Town Board meetings.  The meetings are held at 7:30 pm on the third Thursday of the month.

WHERE DOES OUR WATER COME FROM?

In general, the sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells.  As water travels over the surface of the land or through the ground, it dissolves naturally-occurring minerals and can pick up substances resulting from the presence of animals or from human activities.  Contaminants that may be present in source water include: microbial contaminants; inorganic contaminants; pesticides and herbicides; organic chemical contaminants; and radioactive contaminants.  In order to ensure that tap water is safe to drink, the State and the EPA prescribe regulations which limit the amount of

certain contaminants in water provided by public water systems.  The State Health Department’s and the FDA’s regulations establish limits for contaminants in bottled water which must provide the same protection for public health.

Our water source is entirely a ground water (well) supply consisting of three wells.  During 2022 the water was pumped from the wells and treated with chlorine to destroy microorganisms and injected with phosphates to control iron and manganese prior to delivery to the customers. An average volume of approximately 241,000 gallons per day was withdrawn from the wells. Total water drawn from the wells for the year for 47,688,00.  This supply served a population of approximately 2,100 plus a central school system of approximately 5,650.  Some water loss can be attributed to water main breaks, flushing and normal system losses.  The annual average charged for water during 2022 was $6.00 per 1000 gallons.

ARE THERE CONTAMINANTS IN OUR DRINKING WATER?

As the State regulations require, we routinely test your drinking water for numerous contaminants.  These contaminants include total coliform, inorganic compounds, nitrate, nitrite, lead and copper, volatile organic compounds, total trihalomethanes, and synthetic organic compounds.  Table I depicts which compounds were detected in your drinking water.  The State allows us to test for some contaminants less than once per year because the concentrations of these contaminants do not change frequently.  Some of our data, though representative, are more than one year old.  A supplement containing all the test results is available for viewing by contacting Christopher Finnegan at the Water Department.  Please call 845-744-2515.  You may request a copy of the supplement containing these results.

What Does This Information Mean?

We have learned through our testing that some contaminants have been detected. We are required to present the following information on lead in drinking water:

“Infants and children who drink water containing lead in excess of the action level could experience delays in their physical or mental development.  Children could show slight deficits in attention span and learning abilities.  Adults who drink this water over many years could develop kidney problems or high blood pressure” If present, elevated levels of lead can cause serious health problems, especially for pregnant women, infants, and young children.  It is possible that lead levels at your home may be higher than at other homes in the community as a result of materials used in your home’s plumbing.  The Pine Bush Water District is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components.  When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking.  If you are concerned about lead in your water, you may wish to have your water tested.  Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline (1-800-426-4791)) or at http://www.epa.gov/safewater/lead.

It should be noted that all drinking water, including bottled drinking water, may be reasonably expected to contain at least small amounts of some contaminants.  The presence of contaminants does not necessarily indicate that water poses a health risk.  More information about contaminants and potential health effects can be obtained by calling the EPA’s Safe Drinking Water Hotline (800-426-4791) or the Orange County Health Department at 845-291-2331.

Although our drinking water met or exceeded state and federal regulations, some people may be more vulnerable to disease causing microorganisms or pathogens in drinking water than the general population.  Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections.  These people should seek advice from their health care provider about their drinking water.  EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium, Giardia, and other microbial pathogens are available from the Safe Drinking Water Hotline (800- 426-4791).

WHY SAVE WATER AND HOW TO AVOID WASTING IT?

Although our system has an adequate amount of water to meet present and future demands, there are a number of reasons why it is important to conserve water:

* Saving water saves energy and some of the costs associated with both of these necessities of  life;

* Saving water reduces the cost of energy required to pump water and the need to construct  costly new wells,       pumping systems and water towers; and

* Saving water lessens the strain on the water system during a dry spell or drought, helping to avoid severe water use restrictions so that essential fire fighting needs are met. You can play a role in conserving water by becoming conscious of the amount of water your household is using, and by looking for ways to use less whenever you can.  It is not hard to conserve water.  Conservation tips include:

* Automatic dishwashers use 15 gallons for every cycle, regardless of how many dishes are loaded.  So get a run for your money and load it to capacity.

* Turn off the tap when brushing your teeth.

* Check every faucet in your home for leaks.  Just a slow drip can waste 15 to 20 gallons a day.  Fix it up and you can save almost 6,000 gallons per year.

* Check your toilets for leaks by putting a few drops of food coloring in the tank, watch for a few minutes to see if the color shows up in the bowl.  It is not uncommon to lose up to 100 gallons a day from one of these otherwise invisible toilet leaks.  Fix it and you save more than 30,000 gallons a year.

* Use your water meter to detect hidden leaks.  Simply turn off all taps and water using appliances, then check the meter after 15 minutes.  If it moved, you have a leak.

There are presently three New York State Department of Health certified water operators employed by the Pine Bush Water District.  Each operator must receive continuing education throughout the year.  We at the Pine Bush Water Department work around the clock to provide top quality water at every tap.  We ask that all of our customers help us protect our water sources, which are the heart of our community, our way of life, and our children’s future.

PLEASE CALL MY OFFICE IF YOU HAVE ANY QUESTIONS. 845-744-2515.

                       

Christopher Finnegan, Chief Operator, Water & Sewer

Footnotes:

1.  If iron or manganese are present, the total concentration of both should not exceed 0.5 Mg/L.  Higher levels may be allowed by the State when justified by the supplier of water.

2.  Iron is essential for maintaining good health. However, too much iron can cause adverse health effects. Drinking water with very large amounts of iron can cause nausea, vomiting, diarrhea, constipation, and stomach pain. These effects usually diminish once the elevated iron exposure is stopped. A small number of people have a condition called hemochromatosis, in which the body absorbs and stores too much iron. People with hemochromatosis may be at greater risk for health effects resulting from too much iron in the body (sometimes called “iron overload”) and should be aware of their overall iron intake. The New York State standard for iron in drinking water is 0.3 milligrams per liter, and is based on iron’s effects on the taste, odor and color of the water.

3.  Manganese is a common element in rocks, soil, water, plants, and animals. Manganese occurs naturally in water after dissolving from rocks and soil. Contamination of drinking water may occur if manganese gets into surface or groundwater after dissolving from rocks and soil. It may also occur if manganese gets into surface or groundwater after improper waste disposal in landfills or by facilities using manganese in the production of steel or other products.

4.  Manganese is an essential nutrient that is necessary to maintain good health. However, exposure to too much manganese can cause adverse health effects. There is some evidence from human studies that long-term exposure to manganese in drinking water is associated with nervous system effects in adults (e.g., weakness, stiff muscles and trembling of the hands) and children (learning and behavior). The results of these studies only suggest an effect because the possible influences of other factors were not adequately assessed. There is supporting evidence that manganese causes nervous system effects in humans from occupational studies of workers exposed to high levels of manganese in air, but the relevance of these studies to long term drinking water exposure is less clear because the exposures were quite elevated and by inhalation, not by ingestion.4.  Excess manganese produces a brownish color in laundered goods and impairs the taste of tea, coffee, and other beverages.  Concentrations may cause a dark brown or black stain on porcelain plumbing fixtures.  As with iron, manganese may form a coating on distribution pipes.  These may slough off, causing brown blotches on laundered clothing or black particles in the water.

5.  Water containing more than 20 mg/L of sodium should not be used for drinking by people on severely restricted sodium diets. Water containing more than 270 mg/L of sodium should not be used for drinking by people on moderately restricted sodium diets.

6.  The level presented represents the 90th percentile of the 20 sites tested. A percentile is a value on a scale of 100 that indicates the percent of a distribution that is equal to or below it. The 90th percentile is equal to or greater than 90% of the copper values detected at your water system.  In this case, 20 samples were collected at your water system and the 90th percentile value was the third highest value. The action level for copper was not exceeded at any of the sites tested.

7.  The level presented represents the 90th percentile of the 20 sites tested. A percentile is a value of a scale of 100 that indicates the percent of a distribution that is equal to or below it. The 90th percentile is equal to or greater than 90% of the lead values detected at your water system.  In this case, 20 samples were collected at your water system and the 90th percentile value was the third highest value. The action level for lead was exceeded at one of the sites tested.  Please see section “What does this information mean?” for health information on Lead. 

8. Please note that in addition to PFOS and PFOA, the lab ran the analysis for the entire EPA method 537.1, which includes 16 additional perfluorinated chemicals, 4 of these additional chemicals were detected, the highest of which was 4.19 ng/l. These additional analytes are not currently regulated and do not have an MCL.

Pine Bush W.D.

NY3503553

Source Water Assessment Report Summary

The NYS DOH has completed a source assessment for this system, based on available information. Possible and actual threats to this drinking water source were evaluated. The state source water assessment includes a susceptibility rating based on the risk posed by each potential source of contamination and how easily contaminants can move through the subsurface to the wells.  The susceptibility rating is an estimate of the potential for contamination of the source water, it does not mean that the water delivered to consumers is, or will become contaminated.  See “Table of Detected Contaminants” for a list of the contaminants that have been detected.  The source water assessments provide resource managers with additional information for protecting source waters into the future.

As mentioned before, our water is derived from three drilled wells.  The source water assessment has rated these wells as having a medium-high to susceptibility to microbials, nitrates, industrial solvents, and other industrial contaminates.  These ratings are due primarily to the close proximity of SPDES permitted discharge facilities (industrial/commercial facilities that discharge wastewater into the environment and are regulated by the state and/or federal government), the low-level residential activity and the pasture that are located in the assessment area.  In addition, the wells draw from an unconfined aquifer of high hydraulic conductivity and the overlying soils may not provide adequate protection from potential contamination.  While the source water assessment rates our well as being susceptible to microbials, please note that our water is disinfected to ensure that the finished water delivered into your home meets New York State’s drinking water standards for microbial contamination.

The Town of Crawford has made some significant upgrades to your water system with guidance from our water operators from H2O Innovation. Including, Fire Hydrants have been replaced, relocation of hydrants to better suite the needs of the public.. All Hydrants in the system have been tested and working. Flushing of the district has continued, we have daytime and nighttime flushing operators. Every Spring and Fall, the town will send out information beforehand. This removes all settling common to natural minerals in the system mains. We have noticed significant improvement of water quality out of our hydrants with this flushing program. Meters throughout the system have been repaired to insure correct asset management of our water.

Green Sand filter project is completed and we are seeing great removal or iron and manganese in the system, we will continue to flush to remove and keep our water safe.  

A copy of the assessment, including a map of the assessment area, can be obtained by contacting us, as noted in this report. H2O Innovation 24 hour answering service number (845)888-5755. Thanks!

Glossary of Terms

Non-Detects (ND) - Laboratory analysis indicates that the constituent is not present.

Action Level - The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.

Conversion Factor - Multiply                        By                                  To Obtain

                                 Mg/L(ppm)           Multiply detected                      Ug/L(ppb)

                                                               Level by 1,000

                                  Divide                           By                                   To Obtain

                                  UG/L(ppb)          Divide detected                         MG/L(ppm)

                                                              Level by 1,000

Hardness - Measured in grains (1 grain=17.1 mg/L) or mg/L, any water over 10 grains is considered very hard.

Maximum Contaminant Level - The “Maximum Allowed” (MCL) is the highest level of a contaminant that is allowed in drinking water.  MCLs are set as close to the MCLGs as feasible using the best available treatment technology.   MCL’s are set at very stringent levels.  To understand the possible health effects described for many regulated constituents, a person would have to drink 2 liters of water every day at the MCL level for a lifetime to have a one-in-a-million chance of having the described health effect.

Maximum Contaminant Level Goal – The  ”Goal” (MCLG) is the level of a contaminant in drinking water below which there is no known or expected risk to health.  MCLGs allow for a margin of safety.

Maximum Residual Disinfectant Level (MRDL):  The highest level of a disinfectant allowed in drinking water.  There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

Maximum Residual Disinfectant Level Goal (MRDLG): The level of a drinking water disinfectant below which there is no known or expected risk to health.  MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contamination.

Parts per million (ppm) or Milligrams per liter (mgl) - One part per million corresponds to one part of liquid in one million parts of liquid ( parts per million - ppm)

Parts per billion (ppb) or Micrograms per liter - One part per billion corresponds to one part of liquid in one billion parts of liquid (parts per billion - ppb)

**IS OUR WATER SYSTEM MEETING OTHER RULES THAT GOVERN OPERATIONS?

During 2023, our system was in compliance with applicable State drinking water operating, monitoring and reporting requirements.

Table of Detected Contaminants

Contaminant

Violation

Yes/No

Date of Sample

Level Detected

(Avg/Max)

(Range)

Unit

Measure-ment

MCLG

Regulatory Limit (MCL, TT or AL)

Likely Source of Contamination

Barium

No

7/14/21

Max = 0.23

Range =

0.11 to 0.23

mg/l

2

MCL = 2

Erosion of natural deposits.

Arsenic

No

7/18

Max = 1.4

Range =

ND to 1.4

ug/l

N/A

MCL = 10

Erosion of natural deposits.

Sodium

No

8/22/23

Max = 76.5

Range =

11.1-76.5

mg/l

N/A

See Note 5

Road Salt

Nickel

No

7/14/21

Max = 3.2

Range =

1.9 to 3.2

ug/l

100

MCL = 100

Erosion of natural deposits

**Copper6

No

9/27/23

90th%tile= 0.34 (0.018 - 0.432)

MG/L

1.3

AL=1.3Mg/l

Corrosion of household plumbing systems

**Lead7

No

9/27/23

90th %=8.74

(ND – 74.8)

Ug/l

0

AL=15

Corrosion of household plumbing systems

Nitrate

No

6/22/23

8/21/23

Range = 0.119-0.358

mg/l

10

MCL=10

Run-off from fertilizer use

 

Water Main Flushing Program Pine Bush Water

The 2024 Water Main Flushing Program:

Time flushing 9:00 am to 4:00pm

May 6 - Main Well, Holland, EJR, Kelly, Borden, Cameron, Church, Edmunds

May 7 - Crispell, Blackhawk, Stock Market, Boniface

May 8 - Boniface, Ted, McDonalds to Route 52

May 9 - Maple, Charles, Prospect, New Center

May 10 -True Value Plaza, Rt 52, Hueg, Depot, Railroad, North

May 13 & 14 - Orchard, Shawangunk, Van Kueren, Finneran, Kerilee, Greising, Martin, Arthur, Gross, Hardenburgh

Please contact the Water Department at 845-744-2515 with any question about the 2024 flushing programs.

More Information about Flushing:

During the flushing program, most crews work between 9:00 am to 4:00 pm, Monday through Friday

What is the Water Main (Hydrant) Flushing Program?

To improve water quality and minimize discoloration, water mains are comprehensively flushed by a technique known as Conventional flushing. The procedure is performed in warm-weather months and involves the systematic opening and closing of hydrants, one section of the main at a time, to force the water through the pipes at high velocity, removing accumulated mineral sediment until the water is clear. The operation can take from a few minutes to over hour, although most last about 30 minutes.

How will Flushing Affect Water Services?

When flushing crew are working close to your residence or business, you may experience periods of very low pressure or even a complete stoppage of service. Flushing operations may also lead to discolored water, which can be drawn into homes and businesses if the water is being used during or immediately following flushing. Such events should affect customers for a few hours at the most. The discoloration is caused by iron (red color) or manganese (black color) particles being dislodged from the water main which can stain porcelain and laundry. If discoloration occurs, open cold tap nearest the water meter-usually a basement sink-to full flow until the water runs clear. In some situations, this may take 5 to 10 minutes. It also advised that you make sure your water is clear before doing laundry or other projects for which discolored water could cause problems. A precise schedule of flushing operations is difficult to determine more than a day or two in advance. We ask for your patience and understanding during this critical main cleaning process.

Good afternoon. This is the Pine Bush Water and Sewer District.  We are doing flow tests on seven hydrants on Wednesday, October 4, 2023 from 9:00 am to noon which may affect your water.  This is required for fire protection.

  1. 302 @ High School
  2. Holland Ave @ Elementary School
  3. Maple Ave & Kelly Ave
  4. Main St & New St
  5. Main St & Depot St
  6. Railroad Ave North of Depot St
  7. North St & New St

It is advised that you make sure your water runs clear before doing laundry or other projects to which discolored water could cause problems around this time.  Thank you for your patience while we continue to work on improvements to the water and sewer district.  Any questions, please call 744-2515.

The Water Main Flushing Program that was set to begin today will start tomorrow instead due to the severe weather we've had. The whole schedule is set back a day.

 

We ask for your patience and understanding during this critical main cleaning process. Please call 744-2515 with any questions or concerns.

 

Water Main Flushing Program

The 2023 Water Main Flushing Program will began on Monday, July 10, 2023 (all flushing is daytime unless otherwise noted):

July 10th Main well to Main Street, includes Holland to EJR, Kelly, Borden and Cameron

July 11th Main well to Black hawk Road, Boniface, to Route 52(McDonalds) includes Ted, and Hannaford.

July 12th Route 302 to Route 52i includes High School, Crispell, Edmunds and Main Street

July 13th Maple Ave., New St., Center, Charles, Prospect, Railroad.

 July 14th Depot, Hueg Place

July 17th North St., Orchard, Van Kueren, Shawangunk, Finneran, James, Kerilee

July 18th Greising, Marten, Arthur, Gross, Hardenburgh    

Please contact Water Department at (845) 744-2515 with any questions or comments about 2023 flushing program.

More Information About Flushing

During the flushing season, most crews work between 9:00 a.m. and 1:00 p.m. Monday through Friday.

What is the Water Main (Hydrant) Flushing Program?

To improve water quality and minimize discoloration, water mains are comprehensively flushed by a technique known as Conventional flushing. The procedure is performed in warm-weather months and involves the systematic opening and closing of hydrants, one section of main at a time, to force the water through the pipes at high velocity, removing accumulated mineral sediment until the water is clear. The operation can take from a few minutes to over an hour, although most last about 30 minutes.

How Will Flushing Affect Water Service?

When flushing crews are working close to your residence or business, you may experience periods of very low pressure or even a complete stoppage of service. Flushing operations may also lead to discolored water, which can be drawn into homes and businesses if the water is being used during or immediately following the flushing. Such events should affect customers for a few hours at most. The discoloration is caused by iron (red color) or manganese (black color) particles being dislodged from the water main which can stain porcelain and laundry. If discoloration occurs, open the cold tap nearest the water meter—usually a basement sink—to full flow until the water runs clear. In some situations, this may take 5 to 10 minutes. It is also advised that you make sure your water is clear before doing laundry or other projects for which discolored water could cause problems.

A precise schedule of flushing operations is difficult to determine more than a day or two in advance. If you wish to be notified before work will be done in your area, please call Water Department at (845) 744-2515

We ask for your patience and understanding during this critical main cleaning process.

Water Main Break - 04/11/2023

There was a major water main break at the carwash on Boniface and we continue to work on it. Service should be restored by early evening.

Water Main Break - 04/11/2023

There was a major water main break at the carwash on Boniface and we hope to be restored by early afternoon.

The Town of Crawford is pleased to announce that we are in the process of transitioning our water meter reading system to a LTE Cellular endpoint system to efficiently and securely deliver meter reading data to us via a reliable cellular network.  You will be able to monitor your own water use via an “App”, accessible on your phone, tablet or computer.  You will also be able to set up alarms for excessive use, leaking/ dripping faucets, toilets, etc.

We are asking that you contact our Water & Sewer Department at 845-744-2515 to schedule an appointment to have your Cellular endpoint installed.  Be sure to leave your name, address, account  and telephone number, an employee from our contracting company, JCO will return your call to set up an appointment day and time. 

Water Main Flushing Program

The 2022 Water Main Flushing Program:

Time flushing 9:00 am – 4:00 pm

October 24 – Holland, Kelly, Borden, and Church Street

October 25 – Edmunds, Cameron St, Boniface Dr., Blackhawk, and Ted

October 26 – Ted and all of Route 52

October 27 – Maple, Charles, Prospect, New and Center

October 28 – Hueg, Depot, Railroad and North St    

October 31 – Orchard, Shawangunk, Van Keuren, Finneran, Kerilee, Greising, Martin, Arthur, Gross, and Hardenburg

Please contact Water Department at 744-2515 with any questions or comments about 2022 flushing program.

More Information about Flushing

During the flushing program, most crews work between 9:00 a.m. and 4:00 p.m. Monday through Friday.

What is the Water Main (Hydrant) Flushing Program?

To improve water quality and minimize discoloration, water mains are comprehensively flushed by a technique known as Conventional flushing. The procedure is performed in warm-weather months and involves the systematic opening and closing of hydrants, one section of main at a time, to force the water through the pipes at high velocity, removing accumulated mineral sediment until the water is clear. The operation can take from a few minutes to over an hour, although most last about 30 minutes.

How Will Flushing Affect Water Service?

When flushing crews are working close to your residence or business, you may experience periods of very low pressure or even a complete stoppage of service. Flushing operations may also lead to discolored water, which can be drawn into homes and businesses if the water is being used during or immediately following the flushing. Such events should affect customers for a few hours at most. The discoloration is caused by iron (red color) or manganese (black color) particles being dislodged from the water main which can stain porcelain and laundry. If discoloration occurs, open the cold tap nearest the water meter—usually a basement sink—to full flow until the water runs clear. In some situations this may take 5 to 10 minutes. It is also advised that you make sure your water is clear before doing laundry or other projects for which discolored water could cause problems.

A precise schedule of flushing operations is difficult to determine more than a day or two in advance.  We ask for your patience and understanding during this critical main cleaning process.